Legamaster XTX-7500UHD Mode D'emploi page 16

OSD (ON-SCREEN DISPLAY) CONTROLS
6.2.2. Display Settings
This menu is used for display settings.
Input Source
Select the main input source
Options: VGA, DisplayPort, HDMI1, HDMI2,
HDMI3, OPS;
Default: VGA
Aspect Ratio
Set the aspect ratio.
Options: Auto, Full Screen/16:9, Pillarbox/4:3,
Auto, Letterbox, Point to Point.
Default: Full Screen/16:9
Over Scan
Adjust the image size.
Range: 0%~10%;
Default: 0%
Auto Scan
Select whether the display will automatically scan
for a main input source
Options: On, Off;
Default: Off
Source Renaming
Rename the input source. Select a name from the
options or create a new name. The user defined
name can be up to twelve characters (0~9, A~Z,
a~z, symbols).
Options: Default, STB, DVD, BluRay DVD, HD DVD,
XBOX, Wii, PS4, Computer, User
Default: Default
16
XTX-7500 – USER MANUAL – ENGLISH
Auto Adjust
Force the display to reacquire and lock to the input
signal (VGA source only). This is useful when the signal
quality is marginal.
Options: No, Yes;
Default: No
Note: This feature does not continually reacquire the signal.
VGA Position
Adjust the position of the image (VGA source only).
Press ◄ or ► to select the desired level, and then press
ENTER.
Range: 0~100; Default: 50
VGA Phase
Adjust the phase of the displayed signal (VGA source
only). Press ◄ or ► select the desired level, and then
press ENTER.
Range: 0~255
VGA Clock
Adjust the clock of the displayed signal (VGA source
only). Press ◄ or ► to select the desired level, and then
press ENTER.
Range: 0~100;
Default: 50