Weidmüller EPG 45 Notice D'instructions Originale page 32

3.5. Software installation guide
3.5.1 System requirements
To install the software, a PC with the following minimum requirements must be available::
Operating system
CPU
RAM
HDD
Display resolution
Other
3.5.2 Plug & Play
After successful installation of the supplied software, the EPG 45 Power Tool will be recognized
automatically by your computer and you can update your programs or data.
Please find detailed installation instructions on the supplied CD-ROM.
4. Maintenance instructions
The EPG 45 Power Tool is basically maintenence-free. You should clean the crimping head
after each use and grease the pins at regular intervals. It is important to protect both battery and
charger from moisture and/or foreign objects.
To ensure correct application and a long service life, observe the service intervals specified for
your power tool.
WARNING
If the device loses oil, send it to Weidmüller's customer service immediately.
Hydraulic oil constitutes a hazard to the environment.
If the servive LED lights up, the device must be sent to Weidmüller's customer
service for servicing.
In case the sealing label is damaged because the power tool is opened, the warranty
gets void.
Have your power tool serviced only by qualified repair personnel, and using
only original spare parts.
This will ensure that the safety of power tool is maintained.
Never service damaged batteries.
Any battery servicing should be carried out only by the manufacturer or by authorized
Weidmüller service representatives.
32
Windows 7, 8, 10
Pentium 4 processor, running at a minimum of 1.7 GHz
512 MB or more (1 GB or more is recommended)
200 MB RAM (1 GB recommended)
1024 x 768 or higher, 65.535 or more colors
CD-ROM drive, USB 2.0
2527090000/01/04.2017