Weidmüller EPG 45 Notice D'instructions Originale page 27

2.2 Technical Data
Operating pressure
Max. Stroke
Battery voltage
Drive motor
Battery capacity
Battery type
Battery charging time:
Noise level
Accelerations
Hydraulic oil
Operating temperature
Dimensions
Weight
2.3 Technical properties and functions
• Tool casing and function buttons are made of glass fiber reinforced, insulating and shock
proof polyamide.
• The cycles can be monitored / visualizes graphically on a PC using the supplied SW applica-
tion (force in % and cycle duration).
• Tool control and monitoring with sensorless electronic microprocessor pressure control.
• Continuous voltage supply control by an integrated electronic battery service management.
• Cycle retraceability is ensured by data storage in an internal memory.
• Possibility to read the stored cycle data and perform a firmare update via the Mini USB
Interface.
• Simplified information on the machine status by LED display of a pre-programmed service
interval after 20.000 cycles.
2527090000/01/04.2017
EU
ca. 45 kN
16 mm
Direct current permanent field motor
Li-Ion (without memory effect)
approx. 30 min. for 18V/1.5Ah
< 2,5 m/s
-10°C to +40°C
370 x 124 x 81 mm
approx. 2.3 kg (including battery) approx. 5.1 lbs (including battery)
18 V d c
1,5 Ah
70 dB(A) at 1 m distance
2
(weighted acceleration rms value)
Type „Shell Tellus S2 V15"
US
ca. 5.05 sh ton
10/16"
< 8.2 ft/s
2
14°F to 140°F
14.6" x 4.9" x 3.2"
27