4. When you push the
factory default setting ( upper zone 7ºC / 45ºF, and lower zone 12ºC / 54ºF).
5. The TEMP-ADJ button is set on one certain point when the cellar is off the assembling line.
When you want to change the temperature in the cabinet, please select the right zone and
change accordingly.
PARTICULAR PRECAUTIONS
• In order to function at its highest potential, this wine cooler needs to be placed on flat floor, with
2cm spaces at each side and 10cm space at the backside.
• Use the adjustable iron case to place the cellar fully horizontal.
• Avoid direct sunshine and high temperature.
• Do not place heavy articles on the top of the cellar.
MAINTENANCE
• Shut off power supply before cleaning cabinet.
• Take out wine and shelves, and then clean the cabinet
with soda water first and with clean water last.
• Do not use soap or detergent for the cabinet.
• Clean the cellar regularly.
TROUBLESHOOTING
Symptoms
• Plug not put in
No cooling
• Low voltage
• Fuse broken
Temperatur
• The refrigerator is placed too
e inside not
cold enough
• Bad ventilation;
• Fans don't work;
• The door is not closed tightly
Peculiar
Check whether there is anything
smell inside
sour inside
refrigerator
or
Possible cause
close to a heat source;
or opened too frequently or for
too long time;
button for the first time, the LCD display will show the
• Put in the plug
• Ensure normal voltage
• Change fuse
• Keep the refrigerator away from sunshine
or other heat source;
• Place the refrigerator in the area with
good ventilation and keep things away
from the fans;
• Check whether the plug is connected or
change the fan;
• Close the door tightly and don't open the
door too frequently or for too long time.
Wrap the source or take it out
Solutions