cecotec ProClean 8110 Full Inox Manuel D'instructions page 11

ENGLISH
3. BEFORE USE
1. Take the product out of its package. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately
notify the Technical Support Service.
2. The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
3. To ensure enough ventilation, minimum distances have to be kept:
- From the back part to the wall: 10 cm.
- From the side to the wall: 5 cm.
- Free distance from the top surface: 20 cm.
- From the microwave to the ground: 85 cm.
4. The product must be placed, at least, at 5 m from the TV, Radio or antenna.
5. The product must be placed in such way that the plug is accessible, and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
6. The microwave door must be closed in order to operate.
7. In case there is any manufacturing rests in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
WARNING: Never remove the mica plate!
4. CONTROL PANEL
1. Before cooking
Connect appliance to power outlet. Once it is connected, the LED
light will flash 3 times and will show 1:00. Select cooking program.
2. Time/weight knob
Cooking time and food weight can be increased or decreased
during operation by turning Time/Weight button.
3. Pause/Cancel button
- Before operation: press once in order to cancel selected program
and return to initial stage.
- During operation: press once in order to interrupt operation or
press twice in order to cancel pre-set cooking program.
20 PROCLEAN 8110 FULL INOX
4. Auto reminder
Once the pre-set cooking process is over, it will say END on the LED display panel and 3 "beep"
sounds will be produced.
Press Pause/Cancel button or open microwave door in order to stop the alarm, if not, alarm will
sound at an interval of 3 minutes.
5. Instant cooking
From the stand by position, press the Instant/Start button, the microwave will automatically
operate at high power for 1 minute. Cooking time can be increased or decreased during operation
by turning the Time/Weight knob.
6. Clock/timer setting
In order to set clock or timer, press Defrost/Clock button and adjust time by turning the knob clock
or anti-clockwise.
EXAMPLE: SETTING TIME AT 12:30
1 After powering up, display panel shows colon.
2 Hold Defrost/Clock button for 3 seconds.
3 Turn Time/Weight knob to set exact hour.
4 Press Defrost/Clock button once again.
5 Turn Time/Weight knob to set exact minutes.
6
Press Defrost/Clock button once again to confirm selected time or wait for 5
seconds, time will be set automatically.
7. Microwave cooking
Use this function in order to cook or heat food.
Press Micro Power button, and select on the LED display panel between 100P-80P-60P-40P-20P.
High power 100% microwave power. Perfect for fast and efficient cooking.
Medium High power 80% microwave power. Perfect for medium express cooking.
Medium power 60% microwave power. Perfect for steaming food.
Medium Low power 40% microwave power. Perfect for defrosting food.
Low power 20% microwave power. Perfect for keeping food warm.
ENGLISH
STEPS DISPLAY
1:00
1:00
12:00
12:00
12:30
PROCLEAN 8110 FULL INOX 21