Brentwood Appliances KT-1792S Consignes De Sécurité Et De Fonctionnement page 5

Les langues disponibles

6. When heating is complete, make sure the power switch is UP on the OFF position,

and then unplug the product from the electrical outlet.

WARNING: Always unplug the product from the electrical outlet when it is not in use

or will be left unattended.

NOTE: This kettle does have boil dry protect. It will shut off if it is empty. NEVER run

kettle when empty.

Cleaning Your Kettle:

WARNING: Always unplug the product and allow it to cool before cleaning or storing.

NOTICE: To avoid damaging the product, do not pour cold water into the Appliance

after use and do not use abrasive cleaners/pads to clean any part of the product.

• Make sure the Kettle is empty and has had time to cool before handling it.

• Do not run any part of this appliance in the Dishwasher.

• Remove Kettle from base and clean with a non-abrasive cleaner and warm soapy

water.

• Base should only be cleaned with a soft damp towel and dried before storing. DO

NOT USE RUNNING WATER.

• Dry all parts thoroughly before storing or using again.

Descaling Your Kettle:

WARNING: Always unplug the product before any cleaning. Dry all parts after every

use. Descale your kettle regularly to avoid tougher stains.

Descaling:

Descaling is the removal of mineral deposits from stainless steel. All water contains

minerals including purified and filtered water. After your kettles first use you may see

the first signs of deposits which may be white to reddish brown in color. These stains

are not rust nor are they toxic.

Note: Reheating tea in your kettle may discolor or stain the stainless-steel surface at

the base of the kettle.

To descale your kettle, fill a kettle full of water, add a small amount of white vinegar,

and boil. Unplug the kettle and allow the solution to sit for an hour. For darker stains

leave overnight. This will remove most deposits that have built up from normal use.

Rinse out solution, add fresh water, and boil again. Allow to cool, follow with thorough

cleaning, and dry before next use.