Brentwood Appliances KT-1792S Consignes De Sécurité Et De Fonctionnement page 4

Parts:
Indicator
Light
Using Your Kettle:
1. Place the base on a flat, stable, heat resistant surface away from water splashes and
any sources of heat. Position the kettle on its base and plug it into a power outlet.
2. Lift lid then fill desired amount of water into the Kettle.
CAUTION: Do not overfill the product or operate it when empty.
3. Close the lid. Place the Kettle back onto the base unit. Making sure there is no water
on the bottom of the Kettle.
Turn the Kettle 'ON' by pushing the switch DOWN. You turn the kettle 'OFF' by
lifting the switch UP. The LED light around the kettle will illuminate blue to indicate
the Kettle is heating. NOTE: Never fill the kettle when it is on its base.
4. The Kettle will automatically switch to the OFF position once the water has boiled.
The indicator light will turn off. Make sure that the on/off switch is in the OFF
position after boiling and that the kettle has switched off before removing it from its
base. Note: The switch only works when the Kettle body is correctly placed on base
unit.
5. Lift the Kettle from the base using its handle and pour out your hot water into your
mug or container.
Note: If you need to heat water again, let the appliance rest for 60 seconds before
starting again.
4
Lid
Handle
Water Level
Indicator
*Some kettles have
graduated markings
inside Body.
Power Switch
Power Base