Télécharger Imprimer la page

Brentwood Appliances KT-1792S Consignes De Sécurité Et De Fonctionnement page 3

Publicité

Les langues disponibles

Les langues disponibles

• Do not put any stress on the power cord where it connects to the product, as the power
cord could fray and break.
SPECIAL INSTRUCTIONS:
• Place spout away from you while it's warming, it releases hot steam and scalding may occur.
• Do NOT fill the kettle while it's positioned on Base, dry any leaked water on the bottom of
the kettle before placing it on the base.
• Do not use this kettle to heat anything other than water.
• To prolong the life of the Kettle do not refill it right away after use. Wait for the Kettle to
cool down.
• A short power supply cord is provided to reduce the risk of becoming entangled in or
tripping over a longer cord. An extension cord is not recommended for use with this
product, but if one must be used:
− The marked electrical rating must be at least as great as that of the product.
− If the product is of a 3-prong grounding type, the extension cord must be a grounding-
type 3-wire cord.
− If this product is equipped with a polarized plug (one blade is wider than the other
blade) this is a safety feature. The plug will fit into a polarized outlet only one way.
If you are unable to insert the plug into the electrical outlet, try reversing the plug.
If the plug still does not fit, contact a qualified electrician. Never use the plug with
an extension cord unless you can fully insert the plug into the extension cord. Do
not alter the plug. Do not attempt to defeat the safety purpose of the polarized
plug.
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there may be
accessory parts contained within the packaging material.
WARNING: Do not place any part of the product in a dishwasher.
Before your first official use we recommend running your Kettle:
1. Fill the Kettle to the maximum level mark on the appliance with fresh water.
NOTE: Never fill the kettle when it is on its base.
2. Bring it to a boil.
3. Empty the water from the Kettle. Once cooled rinse Kettle with water.
4. Repeat process at least 2-3 times to ensure your Kettle is clean and discard water after
every process.
5. Do not leave water in the kettle after use as this will quickly start forming scale.
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This is
a result of the heating element chemical reaction. It quickly goes away.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
3

Publicité

loading