Table des Matières
Publicité
Setting the date and time
When you turn on the camera for the first time or after you initialize the
functions, the screen to set the date and time appears.
1
Set the power switch to ON to turn
on the camera.
The screen to set the date and time
appears.
• To turn the camera off, set the power
switch to OFF.
2
Check that [Enter] is selected on
the screen, then press z on the
control wheel.
3
Select a desired geographic location, then press z.
4
Press v/V on the control wheel, or select a setting item by
turning the control wheel, then press z.
5
Press v/V/b/B, or select a desired setting by turning the
control wheel, then press z.
6
Repeat steps 4 and 5 to set other items, then select [Enter] and
press z on the control wheel.
To cancel the date and time setting operation
Press the MENU button.
GB
GB
37
Publicité
Table des Matières
