La Sommeliere LS12SILENCE Manuel D'utilisation page 19

Announced capacity
The advertised capacity is measured according to the EN62552 standard. This standard is calculated
with 75cl traditional Bordeaux type bottles. Any other type of bottle format as well as the addition of
shelves will considerably reduce the storage capacity. The maximum capacity is calculated with a
defined number of shelves which vary according to the models.
3. OPERATION OF CELLAR
•
The device turns on automatically as soon as it is plugged into a power source. To turn it off,
unplug the device.
•
Press the "1" button to turn the LED lighting on or off. The lighting switches off automatically
after 10 minutes (energy saving).
•
Press button "2" to set the desired display; in "° C" degrees Celsius or "F" for Fahrenheit.
•
The "3" LCD screen allows you to view your settings information.
•
To adjust the temperature, press buttons "4" and "5" on the device. The arrow pointing up
increases the temperature of the device. The arrow pointing down decreases the temperature
of the device
4. PARTICULAR PRECAUTIONS
This appliance is indicated for operation in rooms with a very specific ambient temperature, this
climatic class is indicated on the rating plate. The ambient temperature affects the interior
temperature, the humidity of your cellar, and the operation of the compressor. Your device can
operate in an ambient temperature between 5°C and 20°C. Outside of these limits, your device
cannot guarantee normal operation and may cause breakdowns. For optimal operation and to
achieve the desired performance, the device has been designed to operate at an ambient
temperature between 20°C and 23°C. An ambient temperature above or below 20-23°C may affect
the performance of the appliance in reaching the desired set temperature.
The appliance's thermostat is electronic and allows you to set the temperature between 11 and 18
degrees. For storage, it is recommended that you set your appliance to 17 degrees. This temperature
can be adapted according to the type stored. Setting the temperature above 17 degrees will reduce
the energy consumption of the appliance. Setting the temperature below 17 degrees will increase the
energy consumption of the appliance.
1. Lighting
2. C / F Button
3. LCD display
4. Temperature adjustment Rise
5. Lower temperature adjustment
19