JAMO DMR 40 Mode D'emploi page 10

System Setup
To access the DMR 40 setup menu, press "SETUP".
Use / / / to browse through the menus, and press "OK" to select an item.
To exit System Setup, press "SETUP".
General Setup
Some changes can only be managed in General and Language setup if the DVD/CD disc is stopped,
by pressing "STOP" twice, or if the disc tray is open.
DISC LOCK
DISPLAY DIM
DIVX (R) VOD CODE
PBC
LAST MEMORY
DEFAULT
10
All manuals and user guides at all-guides.com
You can prevent play of specific discs with the disc lock func-
tion. Up to 40 discs can be locked.
• Lock – To block the playback of the current disc.
Subsequent access to a locked disc requires a six-digit pass-
word. The default password is '000000'
• Unlock – All discs can be played.
Select the brightness of this unit's display panel.
• 100% – Full brightness.
• 70% – Medium brightness.
• 40% – Dimmest display.
The display will show the unique code which you need to
register your player. Once that's done you can rent and pur-
chase DivX Video On Demand files.
Play Back Control feature is applicable for VCD/SVCD only. It
allows you to play Video CDs (2.0) interactively, following the
menu on the display.
• On – The index menu (if available) appears on the
TV when you load a VCD/SVCD.
• Off – The VCD/SVCD skips the index menu and
plays back directly from the beginning.
Turns on and off ability to memorize the elapsed time of a
media when the player is turned off. When turned back on
the player will continue playing the media from the point
where it was turned off.
If you select this function, all of the functions will be restored
to their defaults.