Westfalia X-SAW Instructions Originales page 8

1. Slide the multi saw into the extension pole.
2. Hook the bracket into the saw
and fold the lever down to
secure the multi saw and the
extension pole together.
3. To remove the multi saw, lift
up the bracket and pull out
the saw from the extension
pole.
4. Attach both components of
the extension pole together
and tighten the screw cap by
turning it counter clockwise
onto the thread. Only hand-
tight the screw cap.
5. Insert the battery into the
extension pole.
6. To switch on the saw, first depress the safety
switch (A) and then press the trigger (B) on the
handle. To switch off the multi saw, release the
trigger.
7. Please observe the manual of the multi saw.
Cleaning and Storing
▪
Clean the extension pole with a dry or lightly
moistened cloth only. Keep the contacts free from
dust and dirt.
▪
Store the extension pole and the multi saw always
out of reach of children and persons in need of
supervision.
Technical Data
Total Length: 124 cm
Weight: 822 g
Operation
8
A
B