Publicité
Les langues disponibles
Les langues disponibles
Florenz 55 cm (21,5") LCD-TV
Set Password: If you had already changed the password,
enter the current password.
Old Password: Enter the current password.
New Password: Enter the new password.
ew Password: Enter the new password.
You can use the Channel Lock to lock selected channels.
Press the
buttons to select the desired channel and
then press the GREEN button on the remote control to
lock it. To unlock a previously locked channel, select the
channel and press the GREEN button.
Note: In order to view locked channels, you have to enter
your password.
Parental Guidance blocks programmes according to their
parental level. This feature is available only for digital TV
and the tuned-in channel must support it.
Hotel Setting: Opens the "Hotel Setting" menu.
All manuals and user guides at all-guides.com
Hotel mode
Restricts access to tuning menus, limitation of maximum
volume setting. Locks picture and signal menus.
Hotel Lock: Press the
Lock" option and then press
tions ON or OFF. After selecting ON, the following options
except the "Clear Lock" option are available.
Lock Channel: Press the
Channel" option and then press
options ON or OFF. After selecting ON, the TV settings op-
tions will not appear in main menu any more.
Set Source: Press the
Source" option and then press
source or OFF. This function lets you set the signal source
(DVB/Cable/ ATV/SCART/AV/YPBPR/PC/HDMI/USB to be
used when powering on the unit. It will be used until
you select a different signal source or disable this
function (OFF).
Picture Lock: Press the
ture Lock" option and then press
the options ON or OFF. After selecting ON, the Picture
menu options will not appear in main menu any more.
Key Lock: Press the
option and then press
ON or OFF. After selecting ON, the front panel buttons
TV/AV/ Menu/CH+/CH-/VOL+/VOL of the device will be
locked.
Max. Volume: Press the
Volume" option and then press
volume. Then the output volume will never exceed the set
maximum value.
Source Lock: Press the
Lock" option and then press OK to enable the menu.
Press the
signal sources labelled ON will not be available any more
in the signal source selection menu.
Clear Lock: Press the
Lock" option and then press
tings will remain disabled until you enable the Hotel Lock
again.
buttons to select the "Hotel
to choose between the op-
buttons to select the "Lock
to choose between the
buttons to select the "Set
to choose a signal
buttons to select the "Pic-
to choose between
buttons to select the "Key Lock"
to choose between the options
buttons to select the "Max.
to set the desired
buttons to select the "Source
button to toggle between ON and OFF. All
buttons to select the "Clear
to enable it. All hotel set-
21
Publicité
