EUROM PD2100 Mode D'emploi page 15

ASSEMBLY
 Remove all the packaging material and check that all the parts are present.
Ensure that definitely no packaging material has remained around the
'head' of the radiator (lamp, cap and switches). Ensure there is a clear work
space and keep flammable materials out of the area.
 Check the device, the electrical cable and the plug for damage. Do not
connect the device to the mains if you notice any damage!
 Do not connect the terrace radiator to the mains before it is fully
assembled!
 To assemble the terrace radiator, you will need a few wrenches that fit.
Follow the instructions below step by step. If you have any doubts about
anything, you should consult your dealer.
Step 1: Attach the soil stand (with the base attachment)
to the base using three M6x10 bolts.
Step 3: Thread the electrical cable with the socket
through the base and the soil stand and pull around 2
metres of cable through it. The ordinary 220-240V plug
thereby remains on the underside of the base behind,
and you should lead the socket through the stand.
Step 4: The top stand is located in the middle stand. Bring the
electrical cable through the middle and top stand and screw the
middle stand to the soil stand. The black ring with the coupling nut is
located beneath the middle stand.
15
Step 2: Place the decorative cap over the soil stand.