Verona VECTI365 Guide D'utilisation page 13

Flush mounting installation
(not recommended)
WARNING!
We do not recommend flush
mounting and sealing as servicing
requires the cooktop to be
removed from the countertop. The
owner carries all risk for flush
mounting the cooktop. The owner
must ensure the cooktop has been
cut out from the countertop before
servicing can be carried out. The
manufacturer will not be liable for
any costs associated with
removing or replacing a flush-
mounted and/or sealed-in product,
nor for repairing any damage that
may be incurred by doing this.
I
G G
Cooktop and cutout dimensions
A
overall width of cooktop
B
overall depth of cooktop
C height of chassis below top of counter
D
width of chassis
E
depth of chassis
F
overall width of routered recess
I
F
overall width of cutout
G overall depth of routered recess
G I
overall depth of cutout
H
corner radius of routered recess
I
height of routered recess
thickness of countertop*
J
(to enable the cooktop to be fastened with the supplied clamps)
* If the countertop is thicker than 1 9⁄16" (40mm), recess its underside to within the thickness range 'H' .
C
F
I
F
(inches (mm))
B
D
G
F
H
I
(incl. height of conduit junction)
Electrical connection is
made at the right rear
A
E
J
35 7⁄16" (900)
20 7⁄8" (530)
4 5⁄16" (110)
34 ¼ " (870)
19 13⁄16" (503)
35 5⁄8" (905)
34 7⁄16" (875)
21 1⁄8" (535)
20 1⁄16" (510)
max. 1⁄16" (2)
min. 1 3⁄16" (30)-
max 1 9⁄16" (40)
3⁄16" (5)
13