Publicité
ENCODING OF PHONO INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE THE PHONO TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH
USB CONNECTING PORT OR SD/MMC CARD.
A) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO " PHONO " MODE AND THEN PRESS THE "
DIRECTLY.
2)
THE LCD DISPLAY WITH SHOW THE WORD "
(21)
OR DOWN
BUTTONS (13). TO SLEECT THE DESIRED SOURCE (USB OR SD) FOR ENCODING.
REC
3)
THEN PRESS THE "
FLASHING, AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDS,.
4)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB.
5)
AFTER FINISH OF RECODING, PRESS AND HOLD THE "
FLASHING AND RETURN TO " PHONO " MODE.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE TRACK
-
THE SYSTEM WILL CREAT A " AUDIO " FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING RECORD MODE.
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
-
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO
THE USB OR SD/MMC CARD
B) COPYING OF MP3/WMA FILE
THE SYSTEM ALLOW TO COPY THE FILE FROM USB TO SD OR SD TO USB BY 1 FILES OR ALL FILES.
I) COPY 1 TRACK
REC
1.
PRESS "
" BUTTON (3) DURING THE PLAYBACK OF THE COPYING TRACK, UNIT WILL DISPLAY
"
" & "
" AND FLASHING. COPYING IS PERFORMING NOW.
2.
AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
II) COPY ALL TRACK
1.
INSERT THE USB STORAGE MEDIA OR SD/MMC CARD AND SET AT " STOP " MODE AFTER UNIT
READING.
REC
2.
PRESS "
" BUTTON (3) AND UNIT WILL DISPLAY "
IS PERFORMING NOW.
3.
AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:
REC
-
IF PRESS THE "
FROM USB TO SD OR SD TO USB.
-
THE SYSTEM WILL CREATE A " FCOPY " FOLDER AND STORE THE COPY TRACK INSIDE.
C) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM PHONO TO USB, THE SELECTABLE
RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1)
SET IN " PHONO " FUNCTION (7) & REMAIN STOP MODE.
2)
PRESS THE " INFO " FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3)
PRESS SKIP
(21) OR
4)
PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) RESUME TO " PHONO
" MODE
D) TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING.
EVERY TIME WHEN PRESS THE "
DURING ENCODING FROM PHONO TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND
CONTINUOUS THE RECRODING. THE TEXT " PHONO " AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN
THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
All manuals and user guides at all-guides.com
USB CARD
" BUTTON (3), THE LCD DISPLAY WILL SHOW "
BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
" BUTTON DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
BUTTON (13) TO SELECT THE DESIRED BITRATE FOR ENCODING.
" (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET
E-6
REC
" AND FLASHING, THEN PRESS SKIP UP
" & "
REC
" BUTTON (3) UNTIL THE LCD STOP
" & "
" AND FLASHING. COPYING
" BUTTON (3)
" AND
Publicité
