Publicité
Les langues disponibles
Les langues disponibles
Optional Installation
These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
supplied DB9 serial cable (see
connect the communication port on your
computer to the communication port of your
UPS. Install on your computer the Tripp Lite
PowerAlert Software appropriate to your
computer's operating system.
EPO Port Connection
2
This optional feature is only for those
applications which require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
With a user-supplied cable, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
14-08-107-93-33B2.indb 7
All manuals and user guides at all-guides.com
) or user-
1A
) to
1B
1A
1B
2A
) to a user-supplied
2A
).
2B
2B
7
USB
RS232
Model: SMC15002URM
USB
USB
Model: SMC15002URM
Model: SMART1500RMXL2UA
RS232
4-5
9/25/2014 12:29:35 PM
Publicité
