Matco Tools MTC2N1WPS Mode D'emploi page 4

All manuals and user guides at all-guides.com
BASIC OPERATION
1
Power button/Multi-function button (power on/off)
Long press for 2 S, power on/off
1
Short press on master speaker to answer/end a call;
1
Press twice on master speaker to reject a call
1
Short press to resume/pause music
1
Press 3 times to disconnect TWS, and then press 2
1
times again to disconnect bluetooth device
Press
1 twice to disconnect bluetooth device
2 3
Volume buttons
Short press to turn the VOL up/long press
2
to next track
2
Short press to turn the VOL down/long press
3
to previous track
3
Remarks: Both speakers can be controlled mutually after pairing success.
05
MTC2N1WPS
2
1
3
2103078-41
INTERFACE INSTRUCTION
Switch indicator
Turn on the speaker, blue LED flashes quickly.
When 2 speakers are pairing, blue LED flashes quickly.
Bluetooth indicator
Blue led will remain lit after connected successfully.
The LED light of sub-master will remain lit and master
LED light will flash quickly after successful pairing.
If out of range of your Bluetooth device, the blue LED will flash
quickly. The device will power off after 10 minutes of inactivity.
Charging indicator
Red LED indicator will remain lit while charging.
Red LED indicator will turn off after reaching a full charge.
Red LED indicator will flash when the battery is low.
The LED indicator will turn off after power off.
06
MTC2N1WPS
Indicator
Micro USB port
2103078-41