Nicols BIRDY 25 MB Manuel D'utilisation page 23

Show Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(show 1) or
mode has been selected, press the ENTER button to setup or automatically return to the
main functions without any change after 8 seconds. To go back to the functions without any
change press the MENU button again.
Show 1 mode - Fixture is placed on the floor. Tilt movement angle 210°.
Show 2 mode - Fixture is fixed under ceiling. Tilt movement angle 90°.
Show 3 mode - Fixture is placed on the speaker, The spot is always projecting
to the audience's direction; i.e in front of the stage. Pan movement angel (left to right to
left): 160°. Tilt movement angel: 90° (60° above horizon; 30° below horizon.)
Show 4 mode - Fixture is fixed under ceiling. The spot is mainly projecting in
front of the stage. Pan movement angel (left to right to left):160°. Tilt movement angel:
90° (vertically, front 75°; back 15°)
Slave Mode
Press the MENU button up to when the
ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or
ENTER button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the MENU button
again.
Sound Mode
Press the MENU button until the
button and the display will blink. Use DOWN and UP button to select the
on) or (sound off) mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Blackout Mode
(show 2) or
(2 light show) mode. Once the mode has been selected, press the
is showing on the display. Pressing
(show 3) or
is showing on the display. Pressing
is showing on the display. Pressing ENTER
23-
(show 4) mode. Once the
(sound