EN
WARNING! Electric shock may
cause SEVERE INJURY or
DEATH. Heed these warnings:
• Do not allow any part of the electric
tiller + cultivator to make contact
with water while it is in operation.
If the appliance becomes wet
while turned off, wipe dry before
starting.
• Do not use an extension cord over
30 m.
• Do not touch the appliance or
its plug with wet hands or while
standing in water. Wearing rubber
boots offers some protection.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimize the vibration and noise
exposure risks:
1. Only use the product as intended by
its design and these instructions.
2. Ensure that the product is in good
condition and well maintained.
3. Use correct application tools for
the product and ensure they in
good condition.
4. Keep tight grip on the handles/
SAFETY INSTRUCTIONS
36
grip surface.
5. Maintain
this
accordance with these instructions
and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread
any high vibration tool use across a
number of days.
Emergency
Familiarize yourself with the use
of this product by means of this
instruction manual. Memories the
safety directions and follow them to
the letter. This will help to prevent
risks and hazards.
1. Always be alert when using this
product, so that you can recognize
and handle risks early.
Fast intervention can prevent
serious injury and damage to
property.
2. Switch off and disconnect from
the power supply if there is any
malfunction. Have the product
checked by a qualified specialist
and repaired, if necessary, before
you put it into operation again.
Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection
product
in