Publicité
Les langues disponibles
Les langues disponibles
Step 5: Mount the MID FRONT [D] between the top of LEFT and RIGHT FRONT [E and
F] with 4 MEDIUM KD SCREWS [P]. See fig. 5
Step 6: Attach the UPPER FRONT [C] above the FRONT PANELS [E, F and D] and lock
in place with 2 MEDIUM KD SCREWS [P] as shown in fig. 6
Step 7: Attach the LEFT TRIANGLE SUPPORT [I] and RIGHT TRIANGEL SUPPORT [J] on
the SIDE PANELS [G and H]. See fig. 7
All manuals and user guides at all-guides.com
fig. 4
fig. 5
fig. 6
Step 8: Connect the CORNER TOP PANEL [K] to the TOP [A] with 6 SMALL SCREWS [R].
See fig. 8
Step 9: : Install the TOP [A] to the unit with 5 MEDIUM KD SCREWS [P] as shown
in fig. 9
Step 10: Tighten all SCREWS.
FIREPLACE INSERT INSTALLATION:
The fireplace insert can be installed after the mantle has been fully assembled.
WARNING: mAKE SURE THE FIREPLACE INSERT CONTROLS ARE IN THE OFF
POSITION AND THE UNIT IS NOT PLUGGED IN.
Step 1: Place the INSERT in back of the mantle on the floor. Carefully lift the INSERT
into the mantel until the trim is against to MANTEL. See fig. 10
fig. 7
fig. 8
fig. 9
Publicité
