DNT WF Future4 pro Manuel D'utilisation page 20

5. Commissioning and confi guration
currently defi ned region is shown directly to the right. Use the + -
button to select the desired region now (see Appendix).
For regions 60 – 89, the forecast is limited to 2 days. Both
fi elds for the following days (the far right on the display) re-
main empty.
The data is synchronized again after changing the region. The
reception of the new weather data requires at least 24 hours.
5.2.2 Setting the time zone
From the start of the confi guration, press the SET - button again for
the time zone setting mode. The text "ti" is shown on the display. The
currently defi ned time zone is shown directly to the right. Use the +
- button to select the desired time zone.
The time received from the radio-time signal generator DCF
or HBG is Central European Time (CET, CEST). Setting the
time zone is therefore only required for other time zones
(e.g. in Portugal or Great Britain).
5.2.3 Contrast setting
From the start of the confi guration, press the SET - button twice
for the display contrast setting mode. The text "con" appears. The
currently set value is displayed in the fi eld on the right. The contrast
can be set within a range from 1 to 16 using the + - button.
Pressing the SET - button again ends confi guration mode.
5.3 Reception test
Press the + - button for at least 3 seconds to activate the test for the
reception of weather data. The text "test" is shown on the display.
The reception indicator for the weather data shows the quality of
reception. The reception is good if the indicator is shown, otherwise
a new location must be found for installing the weather station.
The reception test is either ended after approx. 1 minute automatically
or by actuating the + - button.
All manuals and user guides at all-guides.com
- 20 -