DNT WF Future4 pro Manuel D'utilisation page 19

The distance from the transmitter does also infl uence the reception.
Areas such as Southern Italy or Northern Scandinavia are also criti-
cal areas because of the great distances from the transmitter.
In all regions, so-called "dead spots" can occur making reception
impossible.
Weak batteries in the device decrease the quality of reception.
5. Commissioning and confi guration
5.1 Inserting batteries/Changing batteries
Open the tranmitter´s batteries compartment and insert 2 batteries
(LR03/Micro/AAA) respecting polarities.
Open the battery compartment at the rear of the weather station
and insert the three batteries (LR6/ Mignon/ AA), ensuring proper
polarity, into the battery compartment.
When disposing of dead batteries, see note on the disposal informa-
tion.
All internal data is deleted when you change the batteries.
The confi guration parameters (weather region, time zone
and contrast) must be entered again (see the following
chapter). Receiving all weather data requires a period of at
least 24 hours.
5.2 Calling up the confi guration menu
Press the SET - button for at least three seconds. The fi rst point in
the confi guration menu (weather region) is called up.
Exiting the confi guration menu
Press the SET - button as often as required to reach the normal
display again.
5.2.1 Setting the weather region
After calling up the confi guration menu, the setting mode is active
for the weather region. The text "loc" is shown on the display. The
All manuals and user guides at all-guides.com
5. Commissioning and confi guration
- 19 -