Black & Decker PRMP1000 Manuel D'utilisation page 6

ENGLISH
Blending and whisk attachment
• Use the blending attachment (4) for
blending liquids or mashing solids.
• Use the whisk attachment (6) and
beaters (7) for mixing, beating, whipping
and creaming liquids
Fitting and removing an
attachment
• Fit the motor body (1) into the beater
body (6) or blending attachment (4) and
rotate the motor unit clockwise to lock it
in place.
• Push the beaters (7) into the beater
body
• To remove the attachment, press the
motor unit lock button (8a) then rotate
the motor unit anti clockwise, and pull
the attachment from the motor unit
Use
Blending
• Place the ingredients into a measuring
jug or a suitable container.
• Using a stabbing motion, push the
blades into the ingredients until the
correct consistency is reached.
• When blending liquids or fluid
ingredients, use short pulses to prevent
spillages.
• Keeping the blades submerged will help
to prevent spillages. Take extra care
when blending hot ingredients.
Chopping
• Fit the chopping blade (13) to the drive
spindle (12) and fit the spindle over the
pin in the chopping bowl (11).
6
All manuals and user guides at all-guides.com
• Place the ingredients in the chopping
• Fit the safety lid (9) on the bowl. The
• Press the butttons (8b) and place the lid
• Fit the motor unit (1) to the lid (8) &
• Chop the ingredients until the correct
• Once chopping is completed, unplug the
• Press the motor unit button (8a) and
• Carefully remove the drive spindle &
• Do not operate when the appliance is
Shredding / Slicing
• Place the drive spindle (12) over the pin
• Fit the safety lid (9) on the bowl. The
• Press the buttons (8b) and place the lid
bowl.
tabs on the lid fit into the recesses in the
bowl.
(8) on the safety lid (9), pressing down
to lock it in place.
rotate it clockwise to lock it in place.
consistency is reached. Additional
ingredients can be added through the
chute using the pusher.
appliance & allow the blades to stop
moving.
rotate the motor anti-clockwise to
remove. Press the bowl lid lock buttons
(8b) to remove the lid and safety lid.
chopping blade before transferring the
ingredients to a suitable container.
empty.
in the bowl (11). Carefully fit the required
blade (15 or 16) to the cutter disc (14)
and fit the disc to the drive spindle
tabs on the lid fit into the recesses in the
bowl.
(8) on the safety lid (9), pressing down
to lock it in place.