HAMPTON BAY VFB25ACLED Guide D'utilisation Et D'entretien page 8

I nstallation (continued)
5 B
4
16 – 24 in. joist installation
□ Use long wood screws (BB) to loosely attach the
main body of the fan to one ceiling joist in the two
locations shown.
□ Extend the hanger bars to the opposite ceiling joist.
□ Secure the suspension brackets (B, C, and D) to
the joist using long wood screws (BB).
□ Ensure the main body is level and square to the
joists.
□ Tighten all screws.
BB
B
D
BB
NOTE: Fan body should hang down from joists
approximately 0.5 in. to match finished ceiling material.
5
Duct connection
□ Install a circular duct (F) to outlet and secure it with
duct tape or clamps to the outlet.
□ Install the duct with a gradient of 1˚ ~ 2˚ to the
outside as shown.
BB
8
F