Publicité
Les langues disponibles
Les langues disponibles
. Use the touch-tone pad to select 1TONE or 2PULSE, or press the REVIEW or NEXT
button to scroll to 1TONE or 2PULSE.
. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
NOTE: If you aren't sure which dialing system you have, set the
telephone to tone dialing and make a test call. If the call connects,
the setting is correct. If the call does not connect, set the telephone
to pulse dialing.
Setting Day/Time
NOTE: This setting may only be made with the base.
Time is transmitted automatically by your local phone company as part of Caller ID
service. If you are subscribed to Caller ID service, the current time is set automatically
when you receive your first CID call. Otherwise, you can set the time manually.
The day of week is not set automatically by Caller ID. The day of week must be set
manually through base.
1. Press the FLASH/PROGRAM button until SET DAY shows in the display. Monday is
the default setting.
. Use the REVIEW or NEXT button to select the current day.
. Press FLASH/PROGRAM until SET TIME shows on the display. 12:00 AM is the
default setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the second
digit of the hour, the first digit of the minute, and the second digit of the minute.
5. Use the REVIEW or NEXT button to scroll to AM or PM.
6. Press FLASH/PROGRAM again to store your selection.
Local Area Code
NOTE: This setting may be made on both the base and the cordless
handset, independent of each other.
1. Press the FLASH/PROGRAM button until SET AREA CODE - - - or AREA CODE - - -
shows in the display. - - - is the default setting.
All manuals and user guides at all-guides.com
15
Publicité
