00021036bda
17.04.2008
L
L
Operating elements:
1) Volume control
2) On/off switch
3) Connecting cable to the PC or sound card
4) Power cord 230V
5) Headphone output
Connecting the speakers:
• Connect your sound system to the sound
source (PC-System) using the cable (3) provided
• Plug in your sound system. Make sure to check
the voltage before starting the system.
• Finished.
Safety instructions:
Please observe the safety remarks in the operating
instructions for the PC!
• The speakers should only be transported in their
original packaging, or in other suitable packaging
which protects them from jolts and knocks.
• Condensation can arise when speakers are trans-
ferred from a cold environment into a warm room.
Allow the speakers to climatise to the ambient
temperature, and ensure that they are absolutely
dry, before they are used.
• Ensure that the local mains voltage is 230 V / 50 Hz.
• Ensure that the mains socket is freely accessible.
• The speakers' ON/OFF switch does NOT dis-
connect the speakers from the mains! The mains
plug has to be withdrawn from the mains socket
to disconnect the speakers.
• Do not use the speakers in moist rooms.
• Conduct the cables in such a manner that they
cannot become a hazard (tripping) or be dama-
ged. Observe the corresponding remarks in the
instructions when connecting the speakers.
• Ensure that no objects (e.g. metal paper clips,
etc.) or liquids can enter the interior of the spea-
kers (electric shock, short circuit).
• Immediately switch off the speakers and dis-
connect them from the mains in emergencies (e.g.
damage to speaker case, controls or power supp-
ly line, or in the event of foreign bodies or liquids
entering the speakers).
• Any repair work must be carried out only by quali-
fied and authorized technicians.
All manuals and user guides at all-guides.com
11:52 Uhr
Seite 6
• Always switch off the speakers and disconnect
them from the mains before cleaning them. The
speaker case surface should be cleaned with a
dry cloth. Grime can be removed with a moist
cloth that has been dipped into water with a mild
detergent and then thoroughly wrung out.
Technical Data:
Power supply:
230 V; 50 Hz
Sinus Power:
2 x 200 mW (1 kHz)
< 3% THD+n
Frequency response:
125 Hz - 20 kHz
Dimensions and weight:
Speaker dimensions
(w x h x d):
9,4 x 17,3 x 8,5 cm