CONTINENTAL EDISON CEVCV1600BK Guide D'utilisation page 32

5. Place the microfibre cloth under the brush respecting the right and left brush
pattern, press until you hear a click when it is secured ;
6. Plug the power cord into an electrical outlet and make sure the connection is
correct, press the on / off switch (Picture No. 7) and select the appropriate
function for your application.
OPERATION
7. a. Press the switch "ON / OFF VACUUM" the suction is activated. Repeat the
process, the suction function is disabled ;
b. Select the steam volume according to your needs ; the indicator remains lit
fixedly after 17 seconds (At the first use, the steam function must be kept
activated for 17 seconds), indicating that the steam function is ready. At this
point, the steam function can be used by holding down the steam flow
trigger located under the handle ;
c. Press the high flow steam switch or low flow, while holding down the steam
flow trigger. The high flow steam function or low-flow starts. Release the
switch handle, the steam function will stop, again press the steam switch,
steam is turned off.
EN-12