Télécharger Imprimer la page

Samsung harman karbon HW-Q70R Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

Connecting the Soundbar to the Subwoofer
When the subwoofer is connected, you can enjoy rich bass sound.
Automatic connection between the Subwoofer and the Soundbar
When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the
subwoofer is automatically connected to the Soundbar.
• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
LED Indicator Lights on the Rear of Subwoofer
LED
Status
On
Blue
Blinking
Red
On
Red and
Blinking
blue
Description
Successfully connected
(normal operation)
Recovering the connection
Standby (with the Soundbar
main unit turned off)
Connection failed
Malfunction
ENG - 5
Resolution
-
Check if the power cable attached to the
main Soundbar unit is connected properly
or wait about 5 minutes. If blinking persists,
try manually connecting the subwoofer.
See page 6.
Check if the power cable attached to the
main Soundbar unit is connected properly.
Connect again. See the instructions for
manual connection on page 6.
See the contact information for the
Samsung Service Centre in this manual.

Publicité

loading