using the remote control
1.
on/off: (the master power switch must be "on")Press the "on/off" button
on the remote control, the flame effect (only) will turn on. to turn the firebox
"off" press the "on/off" button again.
2.
flaME EffEcT: Press the flame button to achieve the desired effect.
(no heat)
3.
hEaTing: Press the low heat button (third button) for low heat. Press again to turn off.
Press the high heat button (fourth button) for high heat. Press again to turn off.
using the manual controls
(located on the firebox behind the upper front access panel)
1.
on/off: (the master power switch-1a must be "on") Press the "on/off"
button (1b) on the touchpad, the flame effect (only) will turn on. to turn the
firebox "off" press the "on/off" button again. (noTE: the "on/off" button
on the touchpad does "not" control the master power "on/off" switch)
2.
flaME EffEcT: Press the flame button to achieve the desired effect.
(no heat)
3.
hEaTing: (See details above under Remote Control)
1
2
3
1b
2
3
1a
5