Publicité
3
Using the 4mm Allen Key, loosen the existing Button Head Screws and set screw on each Beam
(3a). Position both Connecting Rods between each set of Beams and slide the Connecting Rods
into each end of the Beam (3b).
3a
4
Place Feet onto Legs (4a). Secure the Feet to
the Legs using the (8) M6 X 30mm Button Head
Screws (4b) and tighten using the 4mm Allen
Key (4c).
8
3b
Foot for
C-Leg Option
Foot for
T-Leg Option
4a
3b
4a
4b
4c
Publicité
