Publicité
Troubleshooting
Error
Table does not move
Table moves at a slow rate
The desk is moving
downwards without any
operation
Automatically Self- Reset
Go down but not go up or
go up but not go down
The upper and downward
height is not enough
The desk could not lifted
Over work
Words "E01" or "E02"
appear
Other codes appear and
there is no response after
pressing the "
" button
If the above operations are performed, the table still does not operate normally, please contact
customer service.
Technical Data
Power
Maximum input current
Input Voltage Range of the Power Supply
Stand by power consumption, primarily
Operating Temperature
Height Range (Standard Range)
Base Width
Travel Speed
Noise Level
Maximum lift capacity (Including worksurface)
Duty Cycle
18
Solution
Ensure all cords are fully secured and the outlet your table is plugged into has power.
Reset table. Then check if overloaded, max loading: 220lbs;
Reset Table
Restart after suspend for 18mins while connecting with power.
Let the desk rest for more than 18 minutes before it can be used normally.
Make sure that the cable is not damaged and the connection is normal. Power off
for more than 10 seconds.
Turn power on.
"
" , is now displayed.
Press and hold the "
" button to reset (follow Reset Function).
2-Leg Adjustable Frame
120V (USA, Canada) or 220V
3A
100--240V
<0.1W
0 - 40
C
O
27 .6" -46.9" (Without Tabletop)
43.3" - 66.1"
0.98 in/s (25 mm/s) (no load)
<50dB
220lbs
10% Max. 2 min on, 18 mins off
Publicité
