All manuals and user guides at all-guides.com
EN
INSTRUCTIONS
10
GROUP II/III VEhICLE BELT
installation and it is for
tHe cHildren WHose WeiGHt
BetWeen 15-36kG.
Before the installation, please
take away the
Harness system of baby car seat.
Note: the Baby insert, Harness
strap, Harness
buckle, Buckle pads& shoulder
pads should be
stored away safely for future use
( see 5.1
removing the 5-point harness
system and cover ).
W A r N I N G do not to use any
load bearing contact points
other than those described in
the instructions and marked
in the child restraint. the belt
must be routed as shown in the
instructions.
a. adjust the height of the
headrest to suit your child.
B. Put the shoulder belt through
the shoulder belt guide under the
headrest.
c. Place your child on the car
seat and pass the belts through
the red waist belt guide. fasten
the car belt with an audible sound
Click
"click".