Publicité
by a UL 294 Listed Class 2 power
limited injector that provides
44–57 V DC, 15.4 W and 4 hours
of standby power. Compliance with
IEEE 802.3 (at or af) specifications
has not been verified as part of
UL 294/B.
-
Tampering alarm pin
header – To comply with
UL 294/7.2.1 (Enclosure), the
tampering alarm shall be connected
to a sound alarm.
•
System considerations
-
The Axis product, whether it is a
standalone door controller or a
system of door controllers, shall not
impair the intended operation of the
panic hardware used in conjunction
with it.
•
Wall and ceiling mount
-
If using a junction box to mount the
Axis product, the junction box shall
be UL Listed.
•
Assign an IP address
-
The functionality of AXIS Device
Manager, see the User Manual, has
not been evaluated by UL.
•
Maintenance instructions
-
For maintenance instructions (some
steps require access to the product's
webpages), see the User Manual.
For information about how to
configure the Axis product using
the product's webpages (AXIS Entry
Manager), see the User Manual.
•
Further information
-
Firmware version: Door Controller,
Model A1001 – 1.20.2
All manuals and user guides at all-guides.com
Publicité
