Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
The water filtration device may operate abnormally due to minor causes not because of the
product malfunction but because of the fact that the user is not familiar with the product use.
In such a case, problems can be solved easily even without the help from the Service Center by
checking the following items. If you can't solve the problem after checking the following items,
please call the Service Center.
Symptom
• Did you clean the storage tank?
The water tastes
• You didn't use the water filtration device
weird.
for a long time.
• Isn't it about time to change the filter?
• Is the water supply cut or isn't the water
The water doesn't
supply valve closed?
come.
• Did you miss the filter replacement times? Request the filter replacement.
• Isn't it about time to change the filter?
• Does the main power connect to the
voltage rating that matches it on the
rating plate?
The water is
flowing slower.
• Didn't you close the main water supply
valve?
• Didn't the temperature of the main water
drop suddenly?
• Was the cold water mode indicator
lightened?
• Didn't you close the main water supply
The cold water /
valve?
hot water doesn't
come.
• Isn't the back side of the water filtration
device and the wall too close?
• Is the main water being supplied actively? Check the main water supply valve.
All operation was
• Does the main power connect to the
stopped suddenly
voltage rating that matches it on the
when driving.
rating plate?
• Isn't water overflowing or leaking?
All manuals and user guides at all-guides.com
Check
Measures to take
Clean the storage tank.
Get rid of the saved water and clean the
storage tank.
Request the filter replacement.
Open the main water supply valve.
Request the filter replacement.
Connect the power cord to the voltage
rating that matches it on the rating plate.
Open the main water supply valve.
If the water temperature is lowered, the
water amount is decreased.
Please press the cold water mode selection
button.
If it is the low water level to protect the
electric motor, the cooling function doesn't
operate. Open the main water supply valve.
Please keep the distance between the back
of the water filtration device and the wall to
10 cm or more.
Connect the power cord to the voltage
rating that matches it on the rating plate.
Request A/S.
23
24
Publicité
