BGS technic 8691 Manuel D'instructions page 4

USE
Place the adaptor over the wheel stud and rotate it until the two pins within the adaptor pass into the
apertures between the two halves of the thread restorer.
The two half of the thread restorer must be fully entirely enclosed within the adaptor.
Place a 29 mm socket onto the hex part of the adaptor and attach a suitable ratchet or sliding bar as a
driving tool. Turn the adaptor in the direction of the defective part of the thread.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of throwing them away as waste. Packaging materials
are to be sorted, taken to a recycling center and disposed of in an environmentally friendly
manner. Contact your local solid waste authority for recycling information. At the end of its
service life, dispose of this product in an environmentally friendly manner.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed