BGS technic 8691 Manuel D'instructions page 3

Wheel Stud Repair Tool | M12 + M14
TOOL PARTS
1 Thread restorer M12 x 1.5
2 Thread restorer M12 x 1.25
3 Thread restorer M14 x 1.5
INTENDED USE
This set is used for re-cutting threads on wheel studs. The unique design allows for two halves of the
thread restorer to be fitted on the good thread and the wound back over the damaged thread, normal at
the end of the stud.
SAFETY INFORMATIONS
• Always wear safety gloves and safety goggles when working with this set.
• Keep children and unauthorized persons away from the work area.
• Make sure that all safety regulations for garages are observed when using this tool.
• Do not let children play with the tool or its packaging.
• Please observe informations from the vehicle manufacturer.
USE
Choose the appropriate thread restorer, paying attention to the thread size and pitch.
Pull apart the two halves of the thread restorer and position the thread restorer behind the damaged part
of the thread.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
4 Replacement O-Rings
5 Adaptor, 29 mm hexagon drive
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8691
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed