Grundig TB 8030 Mode D'emploi page 26

OPERATION ________________________
1 Press On/Off and mode switch
to switch on the appliance.
– HIGH mode LED
blue and the appliance starts in
HIGH mode.
2 Press On/Off and mode switch
consecutively to select a mode.
– LOW mode LED
blue after pressing
HIGH mode.
– MASSAGE mode LED
up blue after pressing
in HIGH mode.
3 Press On/Off and mode switch
to switch off the appliance, regard­
less of the mode selected.
– The appliance switches off
after MASSAGE mode LED
disappears.
The 2 minute timer
Regardless of the mode selected, af­
ter 2 minutes the appliance switches
off automatically. Every 30 seconds
the appliance gives a vibration signal
for your timing.
Changing the
a ttachments
1
R emove the current attachment
from the holder by turning it in the
reverse direction of the arrows on
the attachment and the holder.
2 6 ENGLISH
2
B
lights up
D
3
B
lights up
E
once in
B
Note
lights
F
■
twice
B
B
F
T ake the other attachment out of the
storage container for brushing and
cleaning attachments
P lace the attachment on the holder.
Make sure that the notches of the
holder match the attachment. Turn
the attachment in the same direc­
tion of the arrows until it fits well
into place.
Replace the brush head when
the bristles become bent and
distorted and the wear indica­
tor becomes brighter at the side.
We recommend you to do this
every 4 months.
.
H