B&W Signature 7SE Manuel De L'utilisateur page 22

Frequency response
Nominal impedance
Crossover frequency
Recommended amplifier power
Cut-out size without
Min depth required
Pre-mount frame (optional)
B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
B&W Loudspeakers of America, 54 Concord Street, North Reading, MA 01864-2699, USA Tel: (1978) 664 2870 Fax: (1978) 664 4109
All manuals and user guides at all-guides.com
Signature™7SE
Drive units 1x 180mm (7in) Kevlar
(1in) metal dome high-frequency
40Hz – 20kHz ±3dB
Sensitivity 88dB spl (2.83V, 1m)
8Ω
3.5kHz
20W–150W continuous into 8Ω
on unclipped programme.
Frame size Height:
Width:
pre mount frame Height:
Width:
Cut-out size with
pre mount frame Height:
Width:
102mm (4in) From wall surface
Finishes Semi-matt white suitable for customising
or pre-painting
PMK™8
Kevlar is a registered trademark of DuPont.
Copyright © B&W Loudspeakers Ltd. Printed in England.
http://www.bwspeakers.com
mid/bass1x 25mm
®
3
373mm (14 / in)
4
285mm (11 1 / in)
4
330mm (13 in)
5
245mm (9 / in)
8
346mm (13 5 / in)
8
1
257mm (10 / in)
8