m-cro MICRO FLEX Mode D'emploi page 34

maintenanCe
Maintenance
• Clean the MICRO SCOOTER with a soft, moist cloth after each use. You should also clean the
bearings regularly using a soft cloth and grease them periodically, replacing them if necessary.
Remove any burs and ridges that may occur through usage.
• Check all screws at least once every 3 weeks and tighten them. Always use a screw-securing agent.
• Spray all movable parts of the folding mechanism at least once every 3 weeks with penetrating
oil and wipe them off afterwards.
• Checking the steering set (steering head bearing) after about 4 weeks and readjust if
necessary.
• Check the tires for damage and replace if applicable.
Safety warnings
• The recommended minimum age for the different scooter models can be found on the last page of
the manual (see „The 10 Micro Scooter Safety Rules")
• Ride on smooth, paved surfaces away from motor vehicles.
• Weather conditions, especially wet ones, can compromise traction, braking and visibility
• Avoid sudden changes of route, especially if they include trajectories with sharp points, drainage
grates and change of surfaces
• Always pay attention to pedestrians
• Replace worn or broken parts immediately
34