KitchenAid W10275503B Instructions D'installation page 22

WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
2
Direct Wire—Connect
ground wire
Form bare ground wire into a U-shaped hook. Wrap
ground wire hook clockwise around ground connector
screw and under the washer. Securely tighten ground
connector.
3
Direct Wire—Connect
remaining wires
NOTE: Twist on UL Listed or CSA Approved wire
connector. Gently tug on wires to be sure both are
secured.
Connect wires black to black and white to white, using
UL Listed or CSA Approved twist-on wire connectors
(not included).
22
Ground
Ground
wire
wire
Washer
Ground
connector
Wiring configuration
Power supply wire:
white
black
ground wire
If needed, see website for animated representation
of this step. Visit www.kitchenaid.com/electrical under
FAQ tab.
4
Direct Wire—Secure cable
in strain relief
Tighten strain relief screws to secure cable.
5
Direct Wire—Reinstall
terminal box cover
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use ¹⁄₄" nut driver
and previously removed screw to secure cover.
Terminal box wire:
white
black
ground connector