Xiaomi MI Router 4A Gigabit Edition Mode D'emploi page 8

English
FAQ
I have finished se ing up my network. Why can't I connect to the Internet?
Step 1: Use your phone to search for the Wi-Fi network set by your router. If you can't find it,
make sure that the router is connected to the power and starts working normally
Step 2: Connect your phone to your router's Wi-Fi network, go to "router.miwifi.com", and try
to fix the problem based on the network diagnostics results
I've forgo en the administrator password for my router. What should I do?
If you haven't set a specific password, your administrator password will be the same as
your Wi-Fi password, so try using this to log in. If the problem persists, it is recommended
that you restore your router to the factory se ings, then set up the network again
How do I restore my router to the factory se ings?
First make sure that the router starts working normally, then hold down the Reset bu on at
the base of the router for more than 5 seconds and let go when the system status light turns
orange. When the router finishes restarting, the reset was successful
What do the different indicator lights mean on the router?
There should be two indicator lights on the front panel, which are the network status light
(blue light) and the system status light (three colors: blue, orange, and purple)
Network status light
Off
On
Flashing
System status light
Off
Orange
blue
purple
6
System status light
Light with one color (blue)
Nothing is plugged into the external Internet port
or there is a problem with the connection
Network connection normal
Sending or receiving data
three colors (blue, orange, and purple)
Switched off or not connected to the power
System updating (flashing), system booting up (on,
not flashing)
Functioning normally (on, not flashing)
Safe mode (flashing), system failure (on, not flashing)
Network status light