HURAKAN HKN-ME717 Mode D'emploi page 87

EN
All manuals and user guides at all-guides.com
2. Raise the brewing unit handle and press the plate with "press" label. Remove the brewing
unit. Clean the main equipment with hot water without detergent. Make sure that both filters
contain no cake and dry them.
3. Remove the dreg drawer and the tray, clean them with non-abrasive detergent.
4. Clean the area around the brewing unit thoroughly. Reinstall the dreg drawer.
5. Take the brewing unit by the handle. Install it back in place. Make sure the brewing unit is
properly placed, which is confirmed by a click. After that, install the dreg drawer. Close the
brewing unit door.
87