HURAKAN HKN-ME717 Mode D'emploi page 77

NTC error
The machine will complete the required operations automatically. If the message does not dis-
appear, contact the service center.
Self-protection
The machine will complete the required operations automatically. If the message does not dis-
appear, contact the service center.
DECALCIFYING MODE
1. Press OK to start the automatic descaling.
2. Press OK after adding the tablet.
3. Descaling is in progress.
4. Press "Descaling" for manual operation.
5. Upon completion of descaling, the machine will restart automatically. Press OK after adding
water into the tank.
Note:
1. The entire descaling operation requires about 1,000 ml of water added in four stages.
2. The pump will operate for 3 seconds and make pause for 17 seconds.
3. As the descaling operation is automatic, all programs will resume after any stop.
All manuals and user guides at all-guides.com
Press OK
Press OK
Press OK
EN
77