Virutex FC116U Mode D'emploi page 27

All manuals and user guides at all-guides.com
21. OPTIONAL TOOLS AND ACCESSORIES
held in place beyond the door itself.
22. NOISE AND VIBRATION LEVEL
The noise and vibration levels of this device have been measured
in accordance with European standard EN 61029-1 and serve as
a basis for comparison with other machines with similar appli-
cations.
main applications and may be used as an initial value for eva-
luating the risk presented by exposure to vibrations. However,
vibrations may reach levels that are quite different from the
declared value under other application conditions, with other
tools or with insufficient maintenance of the electrical device or
its accessories, reaching a much higher value as a result of the
work cycle or the manner in which the electrical device is used.
Therefore, it is necessary to establish safety measures to protect
the user from the effects of vibrations, such as maintaining both
the device and its tools in perfect condition and organising the
chine is subjected to loads, and operating times when working
with no-load, in effect, not in use, as reducing the latter may
23. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months fromthe
date of purchase, excluding any damage which is a result of
incorrect use or of natural wear and tear on the machine. All
repairs should be carried out by the official VIRUTEX technical
assistance service.
VIRUTEX reserves the right to modify its products without prior
notice.
NUMBER EXT. DIAM.
1640127 16 mm.
1640140 Drilling bit Ø 24
FC116U / Operating instructions - 27
HEIGHT
13.5 mm.
-