Virutex FC116U Mode D'emploi page 23

K
W
A
J
Z
Y
A
S1
All manuals and user guides at all-guides.com
ADJUSTING THE DEPTH OF THE TRIM
rs
rs1
tion, turning it counter-clockwise.
gently pushing the motor with your hand until the bit just
touches the edge of the door. Hold it in this position, tightening
lower part of the motor support; move and fix the depth stop
S1
original position.
W
K
S3
TRIMMING THE FITTING
W
depth of cut planned for the front of the lock, move the carriage
S3
end of the carriage path, in a rocking movement.
If the fitting to be created is greater than 2 mm, it is advisable to
complete this process using two or three successive movements,
to their initial position once the trim has been completed.
W
K
S3
FC116U / Operating instructions - 23
-
-
-
-
-