Haier LE32B7000C Manuel D'instructions page 19

All manuals and user guides at all-guides.com
Sleep Timer
Channel
Date 2010 04 30
On Time
Picture
Of Time f
Audio
Auto Sleep
Time Zone
Clock
Setup
Lock
Return Move
MENU
Auto Sleep
If after 15 minutes there is no signal input, the TV will switch
off to Auto Sleep, when the Auto Sleep function is set to ON.
The clock time is automatically set when the TV is able to
receive DTV.
5.SETUP MENU
The fifth item of the MENU is the SETUP MENU. You can
adjust the OSD language, Audio language,Subtitle
language etc.
O SD Language E
Channel
A udio Languages
Subtitle
Picture
Teletext Language
Country
Audio
PVR File System
Clock Timeshift Record Time
Auto Standby 4hr
Setup
Blue Screen
Shop Mode
HDMI CEC Control
Lock
Return Move
MENU
Auto Standby(4hr)
1.If after 4 hours from switch on and no changes have
been made to the TV, for example no channel or volume
changes,the TV will start the automatic power down
sequence.
And pop-up window will appear on screen.
After 150 seconds the TV will automatically switch to
standby. To override the automatic shutdown press any
button on the remote control.
2. To cancel the automatic power-down
On the Option Menu select Auto standby(4hr),The TV
screen returns to the Option Menu and Auto standby
(4hr) option will display.
Auto standb y (4hr) OFF
To return to auto shutdown after 4 hours repeat the
above except use the left arrow key to select
PVR File system
In PVR File system menu you can set up USB disk for PVR.
PVR Settings
Move Left
Move Right
OK Select
File Manager Device List
Scheduled Record
Exit
EXIT
Timeshift Record Time: To set the max Timeshift
Off
Record Time.
Auto Standby (4hr): To set the unit to standby
after any 4hours operation.
On Shop mode : To set Shop mode to on or off.
HDMI CEC Cntrol: To set CEC function to on or off.
OSD Time: Press
display time.
Restore Factory Default
Press the
OK OK
Default and press the OK Button to enter the first
setup. Once confirmed, all the settings will be
cleared. This should be used if you experience
any issues with your TV.
Restore factory default will clear all the programs
and password.
Software Updated (USB)
Press the ▼ or ▲ Buttons to select Software Update (USB)
in the Channel Menu. Then press the OK Button to update
nglish
software by using a USB. Follow the software upgrade
instructions provided with the software.
Note: We recommend you perform a factory reset (refer to
France
Restore Factory Default in Setup menu) to ensure the unit
is successfully upgraded.
1 hour
6.LOCK MENU
Off
On
The sixth item of the menu is the LOCK MENU
Off
You can lock system, set password, block program
and set parental guidance Once you set the lock
system on you must input the password before
OK OK
searching the channels or change any programs.
Channel
Picture
Audio
Clock
Setup
Lock
The default pass word is 0000, If you forget the
on(4 hours) .
password, you can use the super password:9443.
Channel Locks: Press
program ,press OK button to block
the program. If you want unblock the program,
pls enter the main menu , input the password,choose
the program,then press OK button again.
Parental Rating: Pre ss
Operation
or to select the menu
or Buttons to select Restore Factory
Enter Password ----
Enable Off
Channel Locks
Parental Rating None
New Password ----
Return Move OK OK
MENU
to choose the
to choose rating.
E - N 18