Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
DESCRIPTION OF THE
TERMINAL BOARD
MONTHLY TESTS
Activate the TEST function by keeping the push-button pressed for 4
seconds. Be sure that the TEST function is carried out properly.
Should the TEST function include the relay testing, remember to reset
the connected gas supply valve.
Warning
In the case of malfunction, do not hesitate to contact a reliable installer.
The detector must be replaced every 5 years. After this time we can-
not guarantee the proper operation of the sensor.
MAINTENANCE
The detector is preset and checked by the manufacturer so that you can
be assured the highest degree of protection. Make sure not to stop it
from working by leaning anything against it, putting furniture in front of
it, or hanging curtains in the way. The tests described above should be
carried out regularly and systematically.
Dust or other dirt should be removed from the detector's grill with a soft
brush once a month at least.
TROUBLE SHOOTING
Sensor failure
The illuminated Yellow led means that the sensor is faulty, being tested
or warming up (regardless of the status of the other leds).
Apply to your reliable installer.
False alarms
Although the detector is barely sensitive to the other gases and vapours,
your sensor could detect high concentrations coming from:
24
Supply voltage
Alimentazione
230Vca
230 Vac
7
6
Remote push-button
Pulsante remoto
(TEST/RESET)
(TEST/RESET)
(NA) (NC)
(NO) (NC)
5
4
3
2
Alarm
Contatto
d'allarme
contact
1
Publicité
