Publicité
Les langues disponibles
Les langues disponibles
•
THE WARRANTY WILL ONLY BE VALID IF YOU FOLLOW THE INSTRUCTIONS CAREFULLY
•
If you do not understand the instructions, or are not sure you can follow them safely, contact a
qualified contractor
•
Improper installation may cause serious injury and/or damage. It is recommended that a qualified
contractor install the EM-P3
• Make sure that the wall you plan to use will safely support four times the combined weight of the
mounted equipment, including its accessories
• Under no circumstances should this product be mounted to metal studs.
• Never exceed the maximum load capacity of 250 lbs
• A second person will be required to assist with several steps
• Visit www.everik.com or call 1-866-604-6966 for assistance
• Read this entire document before commencing the installation
Installation tools....................................................................
Parts list................................................................................
Mounting to triple stud wall...................................................
Mounting to concrete or cinder block....................................
Installing monitor brackets....................................................
Mounting the flat panel to the wall........................................
•
Stud finder
•
Phillips screwdriver
• Wrench
• Drill bit, 6 mm diameter
• Masonary drill bit, 10 mm diameter ( for concrete installation only)
• Power drill
• Socket wrench 13 mm
All manuals and user guides at all-guides.com
WARNING
TABLE OF CONTENTS
Required tools for installation
2
3
4
5
6
8
2
Publicité
