Oregon Scientific BAR206S Manuel De L'utilisateur page 5

1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
3. EU / Uk: Select the nearest radio signal
(BAR206S only)
4. AC power adapter jack
REMOTE SENSOR (FIG 3)
1
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch
All manuals and user guides at all-guides.com
2
4
3
5
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.
LOCATION
Clock / alarm and indoor
temperature area
Outdoor temperature area
CONNECT AC ADAPTER
Connect the supplied power adapter to the power jack,
then plug into a standard AC outlet.
• The batteries are only for back-up use. Always
connect the unit to the power grid source via AC/DC
adapter.
• Make sure the adapter is not obstructed and is
easily accessible to the unit.
• The base station and adapter should not be
exposed to wet conditions. No objects illed with
liquid, such as vases, should be placed on the base
station and adapter.
• To completely disconnect from power, unplug
adapter from the mains.
3
MEANING
Main unit batteries low
Sensor batteries low